| MOQ: | 1 eenheid |
| Prijs: | USD 18,000-35,000 / Unit |
| Standaardverpakking: | Naakt verpakken op flat rack container of bulkvrachtschip, giek vastgezet in transportpositie, stemp |
| Leveringstermijn: | 7-15 werkdagen na bevestiging van betaling |
| Betalingswijze: | T/T,L/C,Western Union |
| Toeleveringskapaciteit: | 20 eenheden per maand |
This used 371 chassis truck mounted crane equipped with a XCMG 12 ton telescopic boom is a versatile lifting solution for construction material handling, prefabricated component installation, machinery positioning and urban infrastructure projects. The combination of a reliable 371 heavy duty truck chassis with XCMG lifting technology delivers dependable performance at a fraction of new equipment cost.
The 6x4 drive configuration provides sufficient traction for both on-road travel and moderate off-road job site access. The XCMG telescopic boom extends to provide substantial working radius while maintaining rated lifting capacity throughout the load chart envelope. Four hydraulic H-type outriggers deploy to create a stable lifting platform, with individual leg controls allowing level setup on uneven ground. The continuous 360 degree slewing capability ensures unrestricted working range around the vehicle.
This pre-owned crane unit has undergone comprehensive inspection and operational testing. The telescopic boom sections have been checked for wear, alignment and smooth extension/retraction. Hydraulic cylinders, hoses and control valves have been pressure tested. The slewing ring and bearing assembly have been inspected for proper lubrication and smooth rotation. All safety devices including load moment indicator, anti-two block and emergency stop systems are verified functional.
| Parameter | Specification |
| Chassis Brand & Model | 371 Heavy Duty Truck Chassis |
| Crane Brand & Type | XCMG Telescopic Boom Truck Mounted Crane |
| Maximum Lifting Capacity | 12,000 kg (12 Tons) |
| Boom Configuration | Hydraulic Telescopic, 4-5 Sections |
| Maximum Boom Length | 20 - 26 Meters (Fully Extended) |
| Minimum Boom Length | 8 - 10 Meters (Fully Retracted) |
| Chassis Drive Configuration | 6x4, Left Hand Drive (LHD) |
| Engine Type | Weichai / Yuchai Diesel, 266-336 HP |
| Emission Standard | Euro II / Euro III |
| Transmission | FAST 9-Speed / 10-Speed Manual |
| Outrigger System | H-Type Hydraulic, 4-Point Stabilization |
| Outrigger Span (Front) | 5,600 mm |
| Outrigger Span (Rear) | 5,200 mm |
| Slewing Angle | 360 Degrees Continuous Rotation |
| Luffing Angle Range | 0 - 78 Degrees |
| Hook Block | Single Hook with Safety Latch, 12 Ton Rating |
| Wire Rope | Anti-Twist Steel Wire Rope, 14-16mm Diameter |
| Gross Vehicle Weight (GVW) | 25,000 kg |
| Curb Weight | Approximately 14,500 kg |
| Overall Dimensions (LxWxH) | 10,500 x 2,500 x 3,600 mm (Transport Position) |
| Wheelbase | 4,500 + 1,350 mm |
| Tire Specification | 11.00R20 Radial (10 + 1 Spare) |
| Fuel Tank | 200 Liters Diesel |
| Working Hours | 4,000 - 9,000 Hours (Varies by Unit) |
| Cabin Type | 371 Day Cab with A/C |
| Safety Features | Load Moment Indicator (LMI), Anti-Two Block, Emergency Stop, Outrigger Interlock |
| Condition | Inspected, Tested Under Load, Fully Operational |
This truck mounted crane is shipped with the boom fully retracted and secured in the transport cradle. All outriggers are retracted and locked. The vehicle is loaded onto a flat rack container or bulk cargo vessel and secured with heavy duty chains, tensioners and blocking. Control levers and joysticks are protected with padded covers. All removable accessories including hook block, counterweights (if applicable), tools and documentation are crated and secured separately. Shipping duration is typically 15-35 days depending on destination port and vessel schedule.
Contact us now to request the full inspection report, load test certificate, operational video and a detailed price quotation for this used 371 chassis 12 ton XCMG truck mounted crane.
| MOQ: | 1 eenheid |
| Prijs: | USD 18,000-35,000 / Unit |
| Standaardverpakking: | Naakt verpakken op flat rack container of bulkvrachtschip, giek vastgezet in transportpositie, stemp |
| Leveringstermijn: | 7-15 werkdagen na bevestiging van betaling |
| Betalingswijze: | T/T,L/C,Western Union |
| Toeleveringskapaciteit: | 20 eenheden per maand |
This used 371 chassis truck mounted crane equipped with a XCMG 12 ton telescopic boom is a versatile lifting solution for construction material handling, prefabricated component installation, machinery positioning and urban infrastructure projects. The combination of a reliable 371 heavy duty truck chassis with XCMG lifting technology delivers dependable performance at a fraction of new equipment cost.
The 6x4 drive configuration provides sufficient traction for both on-road travel and moderate off-road job site access. The XCMG telescopic boom extends to provide substantial working radius while maintaining rated lifting capacity throughout the load chart envelope. Four hydraulic H-type outriggers deploy to create a stable lifting platform, with individual leg controls allowing level setup on uneven ground. The continuous 360 degree slewing capability ensures unrestricted working range around the vehicle.
This pre-owned crane unit has undergone comprehensive inspection and operational testing. The telescopic boom sections have been checked for wear, alignment and smooth extension/retraction. Hydraulic cylinders, hoses and control valves have been pressure tested. The slewing ring and bearing assembly have been inspected for proper lubrication and smooth rotation. All safety devices including load moment indicator, anti-two block and emergency stop systems are verified functional.
| Parameter | Specification |
| Chassis Brand & Model | 371 Heavy Duty Truck Chassis |
| Crane Brand & Type | XCMG Telescopic Boom Truck Mounted Crane |
| Maximum Lifting Capacity | 12,000 kg (12 Tons) |
| Boom Configuration | Hydraulic Telescopic, 4-5 Sections |
| Maximum Boom Length | 20 - 26 Meters (Fully Extended) |
| Minimum Boom Length | 8 - 10 Meters (Fully Retracted) |
| Chassis Drive Configuration | 6x4, Left Hand Drive (LHD) |
| Engine Type | Weichai / Yuchai Diesel, 266-336 HP |
| Emission Standard | Euro II / Euro III |
| Transmission | FAST 9-Speed / 10-Speed Manual |
| Outrigger System | H-Type Hydraulic, 4-Point Stabilization |
| Outrigger Span (Front) | 5,600 mm |
| Outrigger Span (Rear) | 5,200 mm |
| Slewing Angle | 360 Degrees Continuous Rotation |
| Luffing Angle Range | 0 - 78 Degrees |
| Hook Block | Single Hook with Safety Latch, 12 Ton Rating |
| Wire Rope | Anti-Twist Steel Wire Rope, 14-16mm Diameter |
| Gross Vehicle Weight (GVW) | 25,000 kg |
| Curb Weight | Approximately 14,500 kg |
| Overall Dimensions (LxWxH) | 10,500 x 2,500 x 3,600 mm (Transport Position) |
| Wheelbase | 4,500 + 1,350 mm |
| Tire Specification | 11.00R20 Radial (10 + 1 Spare) |
| Fuel Tank | 200 Liters Diesel |
| Working Hours | 4,000 - 9,000 Hours (Varies by Unit) |
| Cabin Type | 371 Day Cab with A/C |
| Safety Features | Load Moment Indicator (LMI), Anti-Two Block, Emergency Stop, Outrigger Interlock |
| Condition | Inspected, Tested Under Load, Fully Operational |
This truck mounted crane is shipped with the boom fully retracted and secured in the transport cradle. All outriggers are retracted and locked. The vehicle is loaded onto a flat rack container or bulk cargo vessel and secured with heavy duty chains, tensioners and blocking. Control levers and joysticks are protected with padded covers. All removable accessories including hook block, counterweights (if applicable), tools and documentation are crated and secured separately. Shipping duration is typically 15-35 days depending on destination port and vessel schedule.
Contact us now to request the full inspection report, load test certificate, operational video and a detailed price quotation for this used 371 chassis 12 ton XCMG truck mounted crane.