Used XCMG GR215 Motor Grader 215HP Turbo Diesel 14FT Blade Heavy Duty Earth Moving Construction Equipment Second Hand

Used XCMG GR215 Motor Grader – Heavy-Duty Road Building and Earth Shaping Champion

Introducing this Used XCMG GR215 Motor Grader, a step up from the GR180 in power and blade capacity, purpose-built for contractors tackling large-scale infrastructure projects where productivity per hour directly impacts project profitability. With 215 horsepower and a 14-foot blade, this machine handles the heaviest grading assignments with confidence, moving more material per pass and reducing the number of passes required to achieve design grades. This unit has been professionally evaluated and is offered in verified working condition ready for your next highway, runway, or mine site project.

Turbocharged Powerplant and Drivetrain Engineering

Commanding this grader is a 215-horsepower turbocharged diesel engine that delivers its peak torque across a remarkably broad RPM band, providing responsive power for heavy blading through compacted materials, gravel surfacing, and sub-base aggregate without the engine lugging or requiring downshifting. The engine's advanced common-rail fuel injection system precisely controls injection timing, duration, and pressure for each combustion cycle, achieving cleaner emissions and better fuel economy than mechanical injection systems. An engine-driven viscous fan clutch modulates cooling airflow based on actual thermal demand rather than running at full speed continuously, reducing parasitic power loss and ambient noise levels.

The six-speed powershift transmission features full-power shifting capability, meaning the operator can change gears under load without interrupting torque delivery to the drive wheels. This capability is especially valuable when transitioning between heavy cut passes and lighter finish passes, or when encountering variable material conditions across a grading run. The transmission's electronic control module monitors engine load, ground speed, and operator command inputs to optimize shift timing for maximum productivity while protecting drivetrain components from abuse.

14-Foot Moldboard Blade and Circle System

The GR215 features a substantial 14-foot (4270mm) moldboard blade, an upgrade over the GR180 that translates to approximately 17% more material moved per pass. This productivity gain compounds significantly on large-area grading projects where the grader may travel hundreds of kilometers in total during a single project. The blade is manufactured from high-carbon abrasion-resistant steel plate with a curved moldboard profile that rolls material efficiently rather than pushing it, reducing draft force requirements and improving fuel economy during heavy cut operations.

The variable hydraulic blade positioning system provides complete control over blade angle, tilt, side-shift, and rotation. The operator can adjust the blade tilt from the cabin to achieve precise cross-slope grading for road crown construction, while the side-shift function extends reach for ditch cleaning and slope work without repositioning the entire machine. The circle rotation system, powered by hydraulic motor through planetary gear reduction, provides smooth blade positioning even when the blade is loaded with material, enabling quick transitions between different grading configurations during complex jobsite operations.

Specifications Table

Structural Durability and Frame Design

XCMG engineered the GR215 frame using finite element analysis to optimize material distribution for maximum strength-to-weight ratio. The main frame rails are fabricated from high-tensile steel plate with full-penetration welded cross members at all stress concentration points. The articulation joint features a large-diameter hardened pivot pin with replaceable bushings, designed for extended service life under the constant articulation movements typical of road construction grading operations. The rear frame houses the engine, transmission, and hydraulic systems within a modular sub-frame that can be disconnected for major service access.

The six-wheel drive system delivers maximum tractive effort for heavy blading operations in challenging conditions. Each tandem axle assembly features an inter-axle differential that allows speed variation between the front and rear drive axles during turning maneuvers, reducing tire scrubbing and drivetrain stress. The no-spin differential in each axle ensures the grader maintains forward progress even when individual wheels encounter reduced traction surfaces such as loose gravel patches, wet clay areas, or soft shoulder conditions.

Advanced Operator Command Center

The GR215 cabin represents a significant ergonomic advancement over earlier grader designs. The hexagonal ROPS/FOPS cabin structure provides an unobstructed sightline to the blade working area through a curved front windshield that extends below the steering wheel level, allowing the operator to see the blade cutting edge and material flow without leaning forward or standing. Tinted glass on all windows reduces solar heat gain and glare during daytime operations. The cabin's sound insulation package reduces interior noise levels to approximately 78 dBA at rated engine speed, enabling clear two-way radio communication without requiring the operator to remove hearing protection.

The multi-function joystick control system integrates blade lift, blade tilt, blade side-shift, circle rotation, and articulation steering into ergonomic fingertip controls. This system dramatically reduces operator physical effort compared to traditional multi-lever controls, translating to lower fatigue levels during extended grading shifts and more consistent grading accuracy throughout the working day. A 7-inch color LCD display provides access to machine parameters, fuel consumption tracking, service interval reminders, and a rear-view camera feed for safe reversing operations.

Inspection and Condition Assessment

This used XCMG GR215 has completed our thorough inspection protocol specifically developed for motor graders. The engine evaluation includes compression testing, turbocharger inspection including shaft end-play and radial-play measurement, cooling system pressure test, and exhaust gas analysis. Drivetrain inspection covers transmission clutch engagement pressure measurement, differential backlash verification, and oil analysis from each gear compartment to detect early signs of bearing or gear wear. The blade system receives particular attention with circle wear surface measurement, blade lift cylinder internal leakage testing, articulation joint bearing clearance verification, and hydraulic system pressure and flow measurement. Tire condition assessment includes tread depth measurement across all six positions and sidewall inspection for cuts, bulges, or age-related cracking.

Operational Applications and Project Types

The GR215 motor grader is the preferred choice for heavy highway construction projects involving deep cut and fill operations, major airport runway and taxiway construction requiring precision surface tolerances over large areas, open-pit mine haul road construction and maintenance where grader productivity directly impacts truck cycle times, large-scale commercial and industrial site development with extensive earthwork volumes, agricultural land forming for large-scale irrigation projects, dam and levee construction involving substantial earthmoving volumes, and railway infrastructure projects requiring precise formation grading.

Contact our heavy equipment specialists today for detailed photographs of this specific GR215 unit, comprehensive inspection report with measurements, current hour meter reading, maintenance history documentation, and a customized shipping quotation to your nearest international port. We provide complete export documentation including commercial invoice, packing list, certificate of origin, and bill of lading preparation for seamless international equipment transactions.